What are the precautions in the use of PVC conveyor belt?

With the popularization of conveyor belt in industrial production, the variety diversity, high performance, lightweight, multi-function and long service life of conveyor belt are the concerns of production suppliers. Today, I'd like to introduce some precautions for using conveyor belt in industrial production:

1. Avoid the poor rotation caused by the idler covered by materials, prevent material leakage and jamming between the drum and the belt, pay attention to the lubrication of the moving part, but do not oil the PVC conveyor belt;

2. The drum shall not be started with load;

3. In case of belt deviation, corrective measures shall be taken in time;

4. In case of local damage of the tape, it shall be repaired in time to avoid expansion;

5. Prevent the belt from being blocked by the frame, strut or block materials to prevent it from breaking and tearing the conveyor belt;

6. The type, structure and number of layers of PVC conveyor belt shall be reasonably selected according to the service conditions;

7. The running speed of PVC conveyor belt shall not be greater than 2.5m/s. Fixed force unloading device shall be used for materials with large block and high wear, and low speed shall be used as far as possible;

8. The relationship between the diameter of the transmission drum of the conveyor and the cloth layer of the conveyor belt, the matching of the transmission drum and the redirection drum and the requirements for the bracket angle shall be reasonably selected according to the design regulations of the conveyor.