Telescopic conveyor (also known as telescopic loader), which can expand freely in the length direction and control the length of the conveyor at any time. It can transport materials in two directions, and can be used together with other conveying equipment and material sorting system to realize the automatic production of material in and out of warehouse or vehicle loading and unloading. It has been widely used in various industries.
The use of telescopic belt conveyor shortens the distance of manual round-trip handling of materials, shortens the time of cargo loading and unloading, reduces labor intensity, reduces cargo damage, reduces loading and unloading costs, and improves work efficiency. Telescopic belt conveyor was first used in logistics express and tobacco industry.
Scope of application
Telescopic belt conveyor
The positioning conveyor of telescopic belt conveyor is mainly suitable for loading and unloading bagged goods of about 10-60kg. Functional features of telescopic belt conveyor 1. This conveyor can be moved to different working places at will with only 2 people. 2. It can be pushed directly into the carriage and can be operated in the carriage about 10 meters deep. 3. During the operation of this conveyor, the operation can be completed only by manually dragging the goods in close proximity. The goods can be loaded in the forward direction and unloaded in the reverse direction. The loading and unloading efficiency can reach about 30 goods per minute. 4. According to the operation requirements, the operation position of the conveyor can be adjusted in multiple directions. Using the original mechanical arm hydraulic device, the higher can be raised to 4m and the lower can be reduced to 2m, which solves the problems of difficult stacking of heavy goods.
First: move the conveyor to the loading place; Step 2: move the conveyor to the inside of the carriage; Step 3: turn on the power supply and turn on the switch for operation. The side switch is the reverse switch, the front button is the start switch, the red light is the power indicator, and the display is the counting display device (there is a small button on it to reset the count to zero.); Step 4: according to the operation requirements, adjust the head height through the hydraulic device, pull the hydraulic controller outward, the head will rise, pull it inward, and the head will fall. Note: pull the controller slowly when descending; Step 5: after the operation is completed, unplug the power, turn off the switch, and then move to the designated place for placement.